■ 본 사이트에 게재 된 모든 자료는 메탈넷코리아의 사전허가 없이 무단복제 변형되어 사용할 수 없습니다.
메탈넷코리아 제휴.제안
| |
|
|
|
Hand Held Digital Hardness tester Standard Impact Ball & Impact Bentch |
판매가격: D형 300,000원(VAT별도) |
 |
| Standard Impact Ball | Impact Bentch |
| Hand Held Digital Hardness tester Standard Impact Bodies Technical Data
| | Impact Bodies | D / DC | D+15 | DL | C | G | E |
| Mass | 5.5g | 7.8g | 7.3g | 3.0g | 20.0g | 5.5g |
| Test Tip |  |
 |
 |
 |
 |
 |
 |
|
 |
|
 |
|
| Hardness | 1600HV | 5000HV |
| Material | Tungsten Carbide | Diamond |
|
Hand Held Digital Hardness tester Standard Block & Impact Wire cable |
판매가격: D형 350,000원(VAT별도) |
판매가격: 300,000원(VAT별도) |
| Standard Block | Impact Wire cable |
|
Hand Held Digital Hardness tester Support Rings
|
|
Impact testers only work properly, if the impact body has a certain position in the guiding tube at the moment of impacting the test surface.
In the normal position when testing flat samples, the spherical test tip is located exactly at the end of the guiding tube.
When testing spherical samples with standard support rings, it is to be observed that the radii R of curvature do not drop below the values indicated.
| 1. Standard Support Rings | | The standard support rings are supplied with the impact device. |
| Impact Devices | Model | Shape | Dimension (mm) | Min radius of curvature (mm) |
| D, DC, C, E | D6 |  | ø20 X 5.5 | 60 |
| D6a |  | ø13.5 X 5.5 | 30 |
| D+15 | D6b/D+15 |  | ø13.5X11X5.5 | 30 |
| G | G6 |  | ø30 X 7 | 100 |
| G6a |  | ø20 X 7 | 50 |
| IMPACT DEVICES Special Supporting Rings(특수지지 링) |
The accessory support rings are available for impact devices D, DC, D+15, C and E, in the format of a set of 12.
We can make special support rings for your special application. |
| NO | Model | Dimension (mm) | External radii (mm) | Photo |
| 01 | Z10-15 | 20 X 20 X 7.5 | 10 - 15 | 
12 PCS
판매가격: 400,000원(VAT별도) |
| 02 | Z14.5-30 | 20 X 20 X 6.5 | 14.5 - 30 |
| 03 | Z25-50 | 20 X 20 X 6 | 25 - 50 |
| 04 | HZ11-13 | 20 X 20 X 5 | 11 - 13 |
| 05 | HZ12.5-17 | 20 X 20 X 5 | 12.5 - 17 |
| 06 | HZ16.5-30 | 20 X 20 X 5 | 16.5 - 30 |
| 07 | K10-15 | ø20 X 7.7 | 10 - 15 |
| 08 | K14.5-30 | ø20 X 6.7 | 14.5 - 30 |
| 09 | HK11-13 | ø17 X 5 | 11 - 13 |
| 10 | HK12.5-17 | ø18 X 5 | 12.5 - 17 |
| 11 | HK16.5-30 | ø20 X 5 | 16.5 - 30 |
| 12 | UN | 52 X 20 X 16
|
|
IMPACT DEVICES Special Supporting Rings(특수지지 링)
|
| 측정하려는 재료의 곡절 반경이 30mm일 경우 특수지지 링을 사용하여 정확도를 제고한다.
|
 |
|
휴대용 디지털 경도시험기
사업자등록번호: 196-34-00418 
문의전화번호: 041-675-5031(代表)